The University of Queensland, through its Sustainable Minerals Institute and the University of Geneva has released a report indicating that sand from the ore production process may contribute to solve two important environmental issues by reducing sand extracted from the natural environment and the mining tailings generation. Vale contributed to the report and facilitated the sampling of its Sustainable Sand produced at the Brucutu mine (MG) for an independent analysis. Vale’s Sustainable Sand is a co-product of iron ore processing. Based on adjustments in the operation, the sandy material, previously disposed in piles and dams, is now processed and transformed into a product, following the same quality controls as in the iron ore production. This year, Vale will allocate around 1 million tons of sand, between sales and donations, for use in civil construction and tests in pavement, among other uses.The report carried out by the universities, called “Ore-sand: A potential new solution to the mining tailings and global sand sustainability crises”, investigated whether sand from ore processing, described by the term “ore-sand”, could become a sustainable source of sand and at the same time reduce the volume of tailings generated by mining.Material characterisation results from the report indicate that the sampled material is inert and non-toxic, and can be suitable for certain applications, either on its own or as a part of a blend, such as with coarser sand, in order to meet specific grading requirements. Separating and repurposing these sand-like materials before they are added to the waste stream would not only significantly reduce the volume of waste being generated but could also create a responsible source of sand. The report found that, from a technical perspective, sand from iron ore operations can be a direct substitute for sand extracted from the environment in brick making, pavement, in embankments, and cement manufacturing. When mixed with coarser sand and other aggregates, it can be used in the production of concrete and mortar, drainage and soil improvement, and water treatment.The life cycle assessment of “ore-sand”, based on the case of Vale's Sustainable Sand, also shows that this material has the potential to present lower net carbon emissions during its production when compared to sand extracted from the environment. However, to get a better idea of the potential of this reduction, it is necessary to carry out an assessment of the product's transport stage, which was not covered in this report.
The University of Queensland, through its Sustainable Minerals Institute and the University of Geneva has released a report indicating that sand from the ore production process may contribute to solve two important environmental issues by reducing sand extracted from the natural environment and the mining tailings generation. Vale contributed to the report and facilitated the sampling of its Sustainable Sand produced at the Brucutu mine (MG) for an independent analysis. Vale’s Sustainable Sand is a co-product of iron ore processing. Based on adjustments in the operation, the sandy material, previously disposed in piles and dams, is now processed and transformed into a product, following the same quality controls as in the iron ore production. This year, Vale will allocate around 1 million tons of sand, between sales and donations, for use in civil construction and tests in pavement, among other uses.The report carried out by the universities, called “Ore-sand: A potential new solution to the mining tailings and global sand sustainability crises”, investigated whether sand from ore processing, described by the term “ore-sand”, could become a sustainable source of sand and at the same time reduce the volume of tailings generated by mining.Material characterisation results from the report indicate that the sampled material is inert and non-toxic, and can be suitable for certain applications, either on its own or as a part of a blend, such as with coarser sand, in order to meet specific grading requirements. Separating and repurposing these sand-like materials before they are added to the waste stream would not only significantly reduce the volume of waste being generated but could also create a responsible source of sand. The report found that, from a technical perspective, sand from iron ore operations can be a direct substitute for sand extracted from the environment in brick making, pavement, in embankments, and cement manufacturing. When mixed with coarser sand and other aggregates, it can be used in the production of concrete and mortar, drainage and soil improvement, and water treatment.The life cycle assessment of “ore-sand”, based on the case of Vale's Sustainable Sand, also shows that this material has the potential to present lower net carbon emissions during its production when compared to sand extracted from the environment. However, to get a better idea of the potential of this reduction, it is necessary to carry out an assessment of the product's transport stage, which was not covered in this report.
