<p>Equinor and partner Polenergia have selected Siemens Gamesa as the preferred supplier of wind turbine generators for the MFW Bałtyk II and MFW Bałtyk III projects, two of the largest and most advanced offshore wind farms being developed in Poland, with a total installed capacity of 1440 MW. The signing of the preferred supplier agreement is a key milestone for the MFW Bałtyk II and MFW Bałtyk III projects. It is an important step towards delivering on the projects’ goal of providing offshore wind energy as a significant part of the Polish energy transformation. Under the announced deal Siemens Gamesa will deliver its flagship model SG 14-236 DD offshore wind turbine to cover the maximum combined capacity of both projects. The turbine has 14 MW nominal power and can reach up to 15 MW capacity with Power Boost.</p><p> MFW Bałtyk II and MFW Bałtyk III are a 50:50 joint venture between Equinor and Polenergia with a potential capacity of up to 1440 MW. Equinor is the operator of the projects through the development, construction, and operations phases.</p><p> MFW Bałtyk II and MFW Bałtyk III cover a combined area of approximately 240 square kilometers located between 22 km and 37 km from the coast. The water depths range from around 25 to 40 meters.</p><p> In additional to MFW Bałtyk II and MFW Bałtyk III, Equinor and Polenergia are jointly developing the MFW Bałtyk I area, with the potential to generate up to 1560 MW. MFW Bałtyk I is following a different timeline and is being matured accordingly.</p><p>This is Siemens Gamesa’s largest direct drive offshore wind turbine and it will have been running commercially for a couple of years when installed on Equinor and Polenergia’s projects. The exact number of machines remains to be determined at a later phase of the development upon completing the final turbine supply agreement and service and warranty agreements.</p>
<p>Equinor and partner Polenergia have selected Siemens Gamesa as the preferred supplier of wind turbine generators for the MFW Bałtyk II and MFW Bałtyk III projects, two of the largest and most advanced offshore wind farms being developed in Poland, with a total installed capacity of 1440 MW. The signing of the preferred supplier agreement is a key milestone for the MFW Bałtyk II and MFW Bałtyk III projects. It is an important step towards delivering on the projects’ goal of providing offshore wind energy as a significant part of the Polish energy transformation. Under the announced deal Siemens Gamesa will deliver its flagship model SG 14-236 DD offshore wind turbine to cover the maximum combined capacity of both projects. The turbine has 14 MW nominal power and can reach up to 15 MW capacity with Power Boost.</p><p> MFW Bałtyk II and MFW Bałtyk III are a 50:50 joint venture between Equinor and Polenergia with a potential capacity of up to 1440 MW. Equinor is the operator of the projects through the development, construction, and operations phases.</p><p> MFW Bałtyk II and MFW Bałtyk III cover a combined area of approximately 240 square kilometers located between 22 km and 37 km from the coast. The water depths range from around 25 to 40 meters.</p><p> In additional to MFW Bałtyk II and MFW Bałtyk III, Equinor and Polenergia are jointly developing the MFW Bałtyk I area, with the potential to generate up to 1560 MW. MFW Bałtyk I is following a different timeline and is being matured accordingly.</p><p>This is Siemens Gamesa’s largest direct drive offshore wind turbine and it will have been running commercially for a couple of years when installed on Equinor and Polenergia’s projects. The exact number of machines remains to be determined at a later phase of the development upon completing the final turbine supply agreement and service and warranty agreements.</p>
