<p>Leverkusen in Gyor based Wuppermann Hungary Kft has obtained the energy certificate in accordance with the requirements of the DIN EN ISO 50001:2018 standard. The certificate is the established standard for energy management, which proves that Wuppermann systematically increases energy efficiency in the company, recognizes potential savings and takes appropriate measures. SGS certificate says “The Energy management system of Wuppermann Hungary Kft has been assessed and certified as meeting the requirements of ISO 50001:2018 for development, production and sales of pickled, hot-dip, galvanized and foil-coated hot strip, cold-rolled, pickled and hot-dip galvanized hot strip.”</p><p>ISO 50001:2018 specifies requirements for establishing, implementing, maintaining and improving an energy management system, EnMS. The intended outcome is to enable an organization to follow a systematic approach in achieving continual improvement of energy performance and the EnMS. This is applicable to activities affecting energy performance that are managed and controlled by the organization, irrespective of the quantity, use, or types of energy consumed & requires demonstration of continual energy performance improvement, but does not define levels of energy performance improvement to be achieved;</p><p>Wuppermann Hungary Kft is a production site for flat products in the Hungarian port of Győr-Gonyu. With an investment volume of over 110 million euros, the Wuppermann has built four production and logistics halls with a total area of around 33,000 square meters on the 100,000 square meters site since the building permit was granted in May 2015. The heart of the plant is a state-of-the-art combined pickling and hot-dip galvanizing plant with a processing capacity of 500,000 tonnes of steel per year.</p><p>With the globally recognized certifiable standard for the introduction and maintenance of an energy management system, Wuppermann ensures that it identifies and implements suitable measures for C02-neutral production by 2025. The certification is thus part of the sustainability strategy with which the Wuppermann Group focuses on the use of electricity from 100% C02-free sources in addition to the consistent reduction of energy requirements. By orienting itself to the standard, Wuppermann's energy efficiency and energy-related performance will be optimized and systematically improved in the long term.</p><p>The Wuppermann Group is a medium-sized family-owned company based in Leverkusen in Germany, which has been successfully active in steel processing for over 145 years. Its product portfolio includes surface-finished flat products, tubes and tubular components made of steel for the mechanical engineering, furniture, food, packaging, automotive, construction and solar industries as well as water and wastewater technology. The Wuppermann Group currently has five production sites</p>
<p>Leverkusen in Gyor based Wuppermann Hungary Kft has obtained the energy certificate in accordance with the requirements of the DIN EN ISO 50001:2018 standard. The certificate is the established standard for energy management, which proves that Wuppermann systematically increases energy efficiency in the company, recognizes potential savings and takes appropriate measures. SGS certificate says “The Energy management system of Wuppermann Hungary Kft has been assessed and certified as meeting the requirements of ISO 50001:2018 for development, production and sales of pickled, hot-dip, galvanized and foil-coated hot strip, cold-rolled, pickled and hot-dip galvanized hot strip.”</p><p>ISO 50001:2018 specifies requirements for establishing, implementing, maintaining and improving an energy management system, EnMS. The intended outcome is to enable an organization to follow a systematic approach in achieving continual improvement of energy performance and the EnMS. This is applicable to activities affecting energy performance that are managed and controlled by the organization, irrespective of the quantity, use, or types of energy consumed & requires demonstration of continual energy performance improvement, but does not define levels of energy performance improvement to be achieved;</p><p>Wuppermann Hungary Kft is a production site for flat products in the Hungarian port of Győr-Gonyu. With an investment volume of over 110 million euros, the Wuppermann has built four production and logistics halls with a total area of around 33,000 square meters on the 100,000 square meters site since the building permit was granted in May 2015. The heart of the plant is a state-of-the-art combined pickling and hot-dip galvanizing plant with a processing capacity of 500,000 tonnes of steel per year.</p><p>With the globally recognized certifiable standard for the introduction and maintenance of an energy management system, Wuppermann ensures that it identifies and implements suitable measures for C02-neutral production by 2025. The certification is thus part of the sustainability strategy with which the Wuppermann Group focuses on the use of electricity from 100% C02-free sources in addition to the consistent reduction of energy requirements. By orienting itself to the standard, Wuppermann's energy efficiency and energy-related performance will be optimized and systematically improved in the long term.</p><p>The Wuppermann Group is a medium-sized family-owned company based in Leverkusen in Germany, which has been successfully active in steel processing for over 145 years. Its product portfolio includes surface-finished flat products, tubes and tubular components made of steel for the mechanical engineering, furniture, food, packaging, automotive, construction and solar industries as well as water and wastewater technology. The Wuppermann Group currently has five production sites</p>
