As part of the IHATEC Pin handling mR project, Hamburger Hafen und Logistik and the Fraunhofer Center for Maritime Logistics and Services CML are researching the automation of pin handling in rail processing by means of mobile robotics. The project is supported by the German Federal Ministry of Transport and Digital Infrastructure BMDV as part of the initiative for innovative port technologies IHATEC.The objective of the “Pin handling mR” research project is to develop and demonstrate the handling of folding pins on container wagons using an autonomous mobile robotics system. Currently, these pins must still be manually fastened before trains are loaded. They are installed at various positions on the container wagons and are raised or moved according to the size of the container. This time-consuming procedure will in future be taken over by a mobile robot that will operate the pins using a gripper arm. Alongside the Fraunhofer CML and in close collaboration with its subsidiaries, HHLA is pursuing the project goal of developing an autonomous prototype of the mobile robot and testing it under real conditions. In addition, software specific to robotics connected to the port logistics system via an interface will be developed within two and a half years. This will allow the control centre to monitor and manage pin handling.HHLA will act as coordinator for the project and will support it with its subsidiaries Container Terminal Altenwerder, HHLA Sky, Hamburg Port Consulting, Metrans and Service Center Altenwerder. CTA and SCA will employ their technical expertise and long-standing terminal know-how to support the tests with their specialists and terminal infrastructure. HHLA Sky will contribute its specially developed IoT Integrated Control Center, which will in future carry out mission planning, monitoring and control of the mobile robot. HHLA rail subsidiary Metrans will support the project with the wagons and operational data integration. HPC will take on administrative handling of the project and, as a consulting company in the port and transport sector, will also provide support with operational questions.The Fraunhofer CML is responsible for the development and procurement of robotics hardware and software. This also includes the selection and procurement of suitable hardware components, their integration into the overall solution, and system testing. In doing so, the Fraunhofer CML is contributing its profound knowledge of robotics.Additional associated partners will also support the project. With their inland terminal expertise in intermodal transport, KTL Kombi-Terminal Ludwigshafen, neska Schifffahrts- und Speditionskontor and Braunschweig’s port operating company will deliver requirements to the robotics system.
As part of the IHATEC Pin handling mR project, Hamburger Hafen und Logistik and the Fraunhofer Center for Maritime Logistics and Services CML are researching the automation of pin handling in rail processing by means of mobile robotics. The project is supported by the German Federal Ministry of Transport and Digital Infrastructure BMDV as part of the initiative for innovative port technologies IHATEC.The objective of the “Pin handling mR” research project is to develop and demonstrate the handling of folding pins on container wagons using an autonomous mobile robotics system. Currently, these pins must still be manually fastened before trains are loaded. They are installed at various positions on the container wagons and are raised or moved according to the size of the container. This time-consuming procedure will in future be taken over by a mobile robot that will operate the pins using a gripper arm. Alongside the Fraunhofer CML and in close collaboration with its subsidiaries, HHLA is pursuing the project goal of developing an autonomous prototype of the mobile robot and testing it under real conditions. In addition, software specific to robotics connected to the port logistics system via an interface will be developed within two and a half years. This will allow the control centre to monitor and manage pin handling.HHLA will act as coordinator for the project and will support it with its subsidiaries Container Terminal Altenwerder, HHLA Sky, Hamburg Port Consulting, Metrans and Service Center Altenwerder. CTA and SCA will employ their technical expertise and long-standing terminal know-how to support the tests with their specialists and terminal infrastructure. HHLA Sky will contribute its specially developed IoT Integrated Control Center, which will in future carry out mission planning, monitoring and control of the mobile robot. HHLA rail subsidiary Metrans will support the project with the wagons and operational data integration. HPC will take on administrative handling of the project and, as a consulting company in the port and transport sector, will also provide support with operational questions.The Fraunhofer CML is responsible for the development and procurement of robotics hardware and software. This also includes the selection and procurement of suitable hardware components, their integration into the overall solution, and system testing. In doing so, the Fraunhofer CML is contributing its profound knowledge of robotics.Additional associated partners will also support the project. With their inland terminal expertise in intermodal transport, KTL Kombi-Terminal Ludwigshafen, neska Schifffahrts- und Speditionskontor and Braunschweig’s port operating company will deliver requirements to the robotics system.
